Pflaumer Brothers, Inc.
Ewing, N.J., U.S.
609-883-4610
Fax: 609-883-1629
E-mail: info@pflaumer.com
Web site: www.pflaumer.com
Additives offered: additives for epoxies,
polyurethanes, polyaspartics
• Tallicin 4040
Tallicin 4040 is a 100% active deaerator
and flow and leveling agent for solventborne and solvent-free two-component
polyaspartics, polyurethanes and epoxies
in primers, clear and pigmented systems.
Tallicin 4040 can also be used with polyester, polyether, polyacrylate, alkyd, chlorinated rubber and other coatings
systems. Compatible with mineral spirits
and xylene.
• Terachem 53-2371 and 53-4368
Terachem Aluminum Oxide Nano-Dispersion are specifically designed for use in
two-component systems. Levels of 15-
20% by weight for the product based on
total resin solids have been achieved in
some systems without visible effect on either clarity or gloss. Terachem Aluminum
Oxide Nano-Dispersion represent the first
nano-dispersions that are economical to
used by reducing the amount of expensive
reactants in the total formulation.
Royal Adhesives and Sealants,
LLC
Coatings and Specialty Polymers Division
Simpsonville, S.C., U.S.
800-763-7272
Fax: 800-825-4583
E-mail: sales@parachem.com
Web site: www.parachem.com
Additives offered: thickeners, rheology
modifiers, surfactants, flame retardants,
adhesion promoters, matte finish additives, viscosity modifiers
• Paragum 600 Thickener
Paragum 600 thickener is the newest Para-Chem rheology modifer. The outstanding performance of this high efficiency, water thin,
alkali-swellable dispersion is further enhanced
by its environmental advantages: APEO-free,
no heavy metals and no solvents. Paragum
600 provides unique, short “buttery” flow
characteristics in a wide range of formulations.
• Paranol FRD-070 Flame Retardant
Paranol FR-070 flame retardant is the
newest Para-Chem polymer system. It is
environmentally friendly, 62% active
aqueous dispersion, that contains no de-cabromodiphenyl oxide or antimony active ingredients. This dispersion can be
used in acrylic, EVA, SBR, vinyl acetate or
polyurethane lattices in either baths, compounding or foaming applications.
Shamrock Technologies
Newark, N.J., U.S.
973-242-2999
Fax: 973-242-8074
E-mail: marketing@shamrocktechnolo-gies.com
Web site: www.shamrocktechnologies.com
• AquaFLON MG
A high solids dispersion containing our
best wax and PTFE powders. It is specifically for thin film coatings, and applicable
to a variety of substrates. AquaFLON MG
offers easy incorporation and gloss retention. It is ideal in can coatings, and for rub
resistance and surface slip in water-based
overprint varnishes.
• Narrow 4
A polyethylene wax powder with a mean
particle size close to 4 micrometers, with
90% between 2 and 8. Narrow 4 eliminates oversize particles and viscosity
build-up in pre-dispersions. It yields high
gloss retention, exceptional film appearance and clarity. Improves rub and slip
performance in OPV and clear films.
Soy Technologies, LLC
Nicholasville, Ky., U.S.
800-769-8748
Fax: 866-767-7902
E-mail: info@soytek.com
Web site: www.soytek.com
Additives offered: Soyanol line of products
• Soyanol 1000E
Soyanol 1000E is an ester-based additive
prescribed for use in both water- and solvent-based systems. Soyanol 1000E provides
multifunctional performance to improve
coating flow, leveling and adhesion, while
helping eliminate VOCs and other haz-
ardous materials such as phthalates. Custom
blends and formulation assistance available.
• Soyanol 5000X-TB
Soyanol 5000X-TB expands the functionality of compliant, low VOC thinners and
multi-purpose solvents. When combined
with exempt solvnts, Soyanol 5000X-TB
provides these expanded function and compatibility across a broader range of coatings.
SCAQMD approved formulations available.
Taminco
Allentown, Pa., U.S.
610-366-6730
Fax: 610-366-6784
E-mail: info@specialtyamines.com
Web site: www.specialtyamines.com
Additives offered: specialty amines for
paint and coatings
Troy Corporation
Florham Park, N.J., U.S.
973-443-4200
Fax: 973-443-0853
E-mail: marketing@troycorp.com
Web site: www.troycorp.com
• Troysol ZLAC
Troysol ZLAC is a superior substrate wetting additive for aqueous coatings and has
zero contribution of VOCs to aqueous systems. Troysol ZLAC provides the same
benefits and attributes long associated with
Troysol LAC, but without the VOC. The
product is particularly effective in wetting
low energy and contaminated surfaces,
without causing undesired fisheyes and
other problems. Troysol ZLAC eliminates
surface defects, improves adhesion, gloss,
flow and leveling and color acceptance.
• Troysol Z370
Troysol Z370 is a universal wetting, mar
and slip additive for solvent, water-re-ducible or aqueous systems. This ‘green’ additive does not contain any VOCs, APEs or
HAPs and approximately 40% of the components are from renewable resources.
Troysol Z370 is a multi functional additive
and is extremely effective in industrial coatings with demonstrated superior properties
over leading competitive products. CW
