• Product name: Three Roll Mill “SNSI”
Safety Upgrades
Introducing, Lehmann’s newest safety package, designed for all three-roll mills. Nip
point/wash0up sick interlock, “life-line”
cable safety. Body bar (slow roll guard),
emergency braking, feed roll interlock for
mill run mode, wash-up mode for safe clean
up), see “ANSI” Standard B65/NAPIM
177.1-2007 for complete explanation.
Myers Engineering
Bell, CA
323.560.4723
Fax: 323.771.7789
Email: cathys@myersmixer.com
Web: www.myersmixer.com
• Product name: M850E Basket Mill
Common to basket mills, the M850 allows for a lone tank process eliminating
pumps, hoses and extra mix tanks for
product transfer. The unique design of the
Myers’ mill allows independent speed
control of both the media and batch agitators. The agitator assists in keeping the
batch homogeneous while waiting for its
next pass through the milling chamber.
Exiting the chamber, the product passes
down the side of a cooling shroud to eliminate heat build-up. The Myers dual shaft
design offers users greater flexibility in
both viscosity ranges and batch sizes. Trials are available at the Bell, CA facility.
Netzsch Premier Technologies,
LLC
Exton, PA
610.280.1242
Fax: 610.280.1299
Email: melanie.mchenry@netzsch.com
Web: netzsch.com
• Product name: NetzschBeads
The selection of appropriate grinding beads
is of utmost importance for optimizing dispersing and wet grinding processes. NetzschBeads are ideally suited for Netzsch
agitator bead mills. Netzsch’s worldwide
network of application laboratories is available to optimize users’ process, increase capacity and energy efficiency while
improving product quality. NetzschBeads
are available in attrium stabilized zirconia,
cerium stabilized zirconia, zirconium sili-
cate, glass and steel. ZetaBeads Plus offer
the highest quality and consistency.
ZetaBeads Nano are available in sizes as
small as 30 μm. Netzsch is the source for
the optimum selection of machine and
grinding media for any application.
Norstone Inc.
Bridgeport, PA
484.684.6986
Fax: 610.275.2404
Email: sales@nortstoneinc.com
Web: www.norstoneinc.com
• Product name: TRAPolene
Norstone’s TRAPolene tank cover for
minimizing evaporation and preventing
debris from contaminating the batch is
now available
with a shaft slit
and splash guard
so that the tank
can be covered
during the mixing process. The
TRAPolene is lightweight and uses nonsparking, non-rusting materials of construction. It can be made with a variety of
materials including anti-static, safety orange and acetone resistant.
Schold Machine Corporation
Chicago, IL
708.458.3788
Fax: 708.458.3866
Email: schold@schold.com
Web: www.schold.com
• Product name: HBLT Mill
Schold Machine Corporation’s high viscosity, high body, low temperature media
mill is the first domestic vertical disk type
mill to grind high viscosity, poor flowing
bases of all colors. Its patent pending design promotes aggressive grinding, while
doing it at the lowest temperatures ever
attained by its previous mills. This design
technique is even capable of grinding UV
bases with the photoinitiator in situ. The
mills are available in 25, 60, and 100-gal-
lon vertical chamber volumes, and in all
the horizontal mills as well. This HBLT
Mill is available for lab evaluation at the
Chicago facility.
Union Process
Akron, OH
330.929.3333
Fax: 330.929.3034
Email: eli@unionprocess.com
Web: www.unionprocess.com
• Product name: Q-03 Circulation Attritor
Union Process, Inc., known globally as a
manufacturer of particle size reduction
and dispersing equipment,
has produced the Q-03, a
small bench-top labora-tory-sized circulation
grinding mill. This smaller
circulation attritor was developed so users can perform lab trials with the advantage of the
circulation grinding system using much
smaller samples (from ½ gallon to one
gallon). The Q-03 circulation attritor offers all of the advantages of larger laboratory or production-sized circulation
attritors including a high circulation
pumping rate, narrow particle size distribution, good temperature control and the
ability to sample and make formulation
adjustments on the fly.
U.S. Stoneware
East Palestine, OH
800.426.8808
Fax: 330.426.1859
Email: info@usstoneware.com
Web: www.usstoneware.com
• Product name: Lab Pro 520 VSR
This small lab unit weighs approximately
23 pounds but has a 25-pound capacity.
It measures a mere 12 7/8” wide x 12
5/8” tall x 10
1/2” in depth.
The three position idle roller
gives it the capability to turn various sized tubes and jars from 3/4” to 6”
diameter. Illuminated power switch and
speed control knob are located on the
front for easy operation. Hinged cover
shuts down machine when opened for
safety. Standard machine has an input
voltage of 115-volt single phase; 230 volt
single phase is also available. CW
