Powder Technologies, Inc.
Powder Technologies, Inc.
3854 Sylon Blvd. • P.O. Box 780
Hainesport, NJ 08036
Tel: 609 914 0521
Fax: 609 914 0318
E-mail: risherwood@powdertechusa.com
www.powdertechusa.com
Your source for high quality powder and liquid
processing equipment
Company Description
Powder Technologies, Inc. (PTI) is the exclusive distributor
throughout North America of Ystral liquid and powder processing systems. Combining the equipment of Ystral, one of the
most experienced, highly regarded processing equipment manufacturers in the world, with our proven commitment to design
and fabrication, we are able to solve your coatings application
requirements while improving production and profitability.
Technologies
Ystral equipment should be the only choice when it comes to
the induction, dispersion, wetting and mixing of powders into
liquids. Their process solutions are second to none. The mixers,
dispersers and the combination mixer/disperser are manufactured in versions from small pilot-scale equipment to complete
turnkey processing solutions. Dust-free powder induction for
hazardous materials is one of their specialties, and difficult process problems are welcomed.
The Products
• The Ystral Jetstream Mixer - meets all requirements to
achieve a complete and homogenous mixture in a vessel. The
turbulences provided by the mixing head and strong vertical
circulation allow optimal mixing of the tank or vessel’s entire
contents without any incorporation of air by a vortex or along
the mixing shaft. Even materials with high viscosities, are fully
influenced. Unlike standard propeller mixers, the medium does
not rotate in the tank and baffles are not required. Even heavy
sediments are fully suspended.
• The Ystral Dispermix – similar in operation to the Jetstream,
but with a serrated stator. Dispermix causes intensive mixing in
both the micro and macro range of the product. It simultaneously disperses and mixes in one single operation and negates
the need for a second step with a high shear mixer.
• Ystral Conti TDS – provides dust and loss-free emptying of
containers, feeding of powder, dosing and adding, wetting and
dispersing to a completely agglomerate-free result – achieved in
one process step within one machine. Production time is minimized, partial processing steps are avoided and production cost
is reduced to a minimum with higher efficiency of the raw material and higher resulting product quality.
Technical Services
Powder Technologies can also assist you with feasibility and engineering studies, process and plant design, installation, start-up,
training, and maintenance and parts inventory. We have a fully
equipped and staffed test facility, as well as rental equipment for
on-site evaluation.