Coatings World - August 2011

Evonik Goldschmidt
Corporation
Hopewell, VA
Tel: 804-451-8658
Fax: 804-541-2783
gary.freelin@evonik.com
www.evonik.com/tego-rc

• Product Name: Tego RC711 and Tego
RC902

Evonik Goldschmidt Corporation offers two radiation technology systems for release applications that lower energy costs, significantly reduce production space requirements and provide fewer restrictions on materials, including those that are temperature sensitive. Evonik’s broad product line of Tego RC radiation curable silicone systems include acrylate and epoxy modified silicones.

Hamamatsu Corporation
Bridgewater, NJ
Tel: 908-231-0960
Fax: 908-231-1539
usa@hamamatsu.com
www.hamamatsu.com

• UV/EB Raw Materials and/or Equipment Offered: Hamamatsu is a leading manufacturer of devices for the generation and measurement of ultraviolet light. These devices include photodiodes, photomultiplier tubes, light sources, x-ray systems and image sensors. Hamamatsu offers mercury-xenon, xenon, xenon flash, and D2 lamps and LED light sources.

• Product Name: Lightningcure LC-L5 The LC-L5 is an UV-LED light source that emits at 365nm or 385nm, with a uniform light level output throughout the LED’s long lifetime. The LC-L5 features low heat emission, low power consumption and a small footprint making it an economical choice over a bulb-type system for curing or drying.

• Product Name: Lightningcure LC-L2 The LC-L2 is an UV-LED light source that emits at 365nm or 385nm, with high output power throughout the LED's long lifetime. Other features of the LC-L2 include

low heat emission, and a small footprint. It is easily controlled through various interfaces such as a RS232-C.

ISP Corp.
Wayne, NJ
Tel: 973-628-4000
Fax: 973-628-4117
sedris@ispcorp.com
www.ispcoatings.com

• UV/EB Raw Materials and/or Equipment Offered: NVP - Monomers of N-vinyl-2- pyrrolidone used in free radical systems; V-CAP reactive diluent (N-Vinyl-2-Caprolactam) used in free radical systems; Rapi-Cure reactive diluent (vinyl ethers) used in cationic, free radical, charge transfer and hybrid systems; Gafgard 233 monomers (mixture of vinyl and acrylate monomers; formulated with N-vinyl-2-pyrrolidone (V-Pyrol/RC))

• Product Name: NVP

Features strong solvent for polymers (epoxies and polyamides), acrylate monomer free, excellent toxicology profile, good adhesion on difficult substrates, low, but effective levels of vinyl ether, hydrophobicity.

• Product Name: V-CAP Features electron-rich reactive double bond, pseudo-cationic, adhesiveness and complexing ability, hydrophobicity, favorable toxicity profile.

Jenton International Whitchurch, UK Tel: 01256 89 2194 Fax: 01256 896486 rlittle@jenton.co.uk www.jentonuv.com

• UV/EB Raw Materials and/or Equipment Offered: Jenton JA rage of 3”, 4. 5”, 6”, 10” modular cure lamps and conveyors

• Product Name: Jenton JA Lumen
Dynamics

Jenton designs and manufactures UV curing (modular) systems and custom engineering including lab conveyors in stainless steel.

Kowa American Corp.
New York, NY
Tel: 212-303-7800/800-221-2076
Fax: 212-310-0101
chemical@kowa.com
www.chemical.kowa.com

• UV/EB Raw Materials and/or Equipment Offered: Kowa offers a wide variety of acrylates and acrylamides along with specialty UV curable oligomers.

• Product Name: NK Oligo UA-122P Urethane Acyrlate Oligomer UA-122P is a difunctional urethane acrylate with polyester structure with outstanding elongation properties and good strength. UV cured films with it can have 40% elongation without failure.

P• roduct Name: NK Oligo UA-6LR,
8LR, and 12LR Urethane Acrylate
Oligomers

These three branched urethane acrylate oligomers have high crosslink density and very low shrinkage. Functionalities range from 6 to 12 acryaltes, appearance light yellow wax.

Miltec UV Stevensville, MD Tel: 410-604-2900 Fax: 410-604-2906 sales@miltec.com www.miltec.com

• UV/EB Raw Materials and/or Equipment Offered: Miltec offers high performance UV curing systems and supplies.

• Product Name: MPI-400 Microwave Powered UV Curing System The powerful MPI-400 is an electrodeless UV system that outperforms the competition where it matters most. Using 25% less energy than the closest competing UV system, the MPI-400’s shockingly fast cure speeds are possible given the system’s ability to deliver the highest peak irradiance at the focal post available today.