Coatings World - June 2009

centrifugal force. Drais DCP Nanostar sets new standards in wet grinding of high tech products down to nanometer range. Various sizes are available with linear mill scale up based on power consumption.

Eiger Machinery, Inc.

Grayslake, IL

(847) 548-0044

Fax: (847) 548-0099

E-mail: sales@eigerus.com Web site: www.eigerus.com Product name: Eiger Machinery Lab Mill Series Expanded Attributes/comments: The Eiger laboratory Mini mill is used for product research, technical service and small batch production of various coatings and dispersions. New chamber sizes now available to process dispersions from 25 mils to 20 liters. Also available are ceramic mills used for purity and contamination free milling and mechanical seals for abrasive slurries. These bench top mills are self pumping and self contained units and available with explosion proof components. The Mini mills are available with 25, 50, 100, 250, 750, 1000 and 2000 ml chambers. Process monitoring instrumentation available.

Glen Mills Inc.

Clifton, NJ

(973) 777-0777

Fax: (973) 777-0070

E-mail: staff@glenmills.com Web site: www.glenmills.com Product name: Polymix Hammer Mill Attributes/comments: Glen Mills Inc. presents the new Polymix Hammer Mill, a flexible laboratory hammer/knife mill. This mill is suitable for dry milling samples from one half-inch down to below 0.25 mm. It is extremely versatile with interchangeable hammers for smashing brittle materials and knife blades for cutting softer materials. Glen Mills offers a wide range of dry grinding, wet grinding, powder blending and sample preparation equipment. Testing and contract services are available. A full range of grinding

media (beads) of glass, steel, alumina and zirconia ceramic grinding media is available from stock in sizes smaller than 0.20 mm to larger than three inches.

Jaygo Incorporated

Union, NJ

(908) 688-3600

Fax: (908) 688-6060

E-mail: sales@jaygoinc.com Web site: www.jaygoinc.com Product name: The Altern Mill – A New Ultra-Fine Wet Grinding Batch Mill Attributes/comments: Jaygo offers new superior technology with high quality results. This mill is a safe, clean, closed system designed for “Super Fine” grinding of coatings, pigments paints, cosmetics and pharmaceuticals. The unique feature of this mill is the ability to load all raw materials, pre-mix/blend and mill in one piece of equipment. The 1 and 2 liter mills are perfect for Pilot Labs. Production Mills range from 25 liter up to 500 liters. All mill sizes can be adapted for specific process requirements.

Jyoti Ceramic Industries Pvt. Ltd. Nashik, India +91 253 2350120/338/729, +91 253 2350023 Fax: +91 253 2350023 E-mail: info@jyoticeramic.com Web site: www.jyoticeramic.com Product name: Zircosil Attributes/comments: Looking at the need of medium density, long-lasting, cost-effective ceramic milling beads, Jyoti started an extensive research to develop suitable ceramic milling beads to meet the demands of a specific segment, who have bead mills but not suitable to carry the load of Zirconox high density ( 6.2 gm/cc) beads. The company recently developed Zircosil–a sapphire hard, tough, medium density, 4. 6 gm/cc (Zirconium Silicate) micro milling beads, which are non-abrasive, high wear resistant, glossy, satin-smooth. Zircosil beads will prove to be an ideal micro milling media, for the bead mills designed and constructed for use of low/medium density 2.6/3.8

gm/cc glass/Zirconium Silicate beads.

Hockmeyer Equipment Corp. Elizabeth City, NC (252) 338-4705 Fax: (252) 338-6540 E-mail: sales@hockmeyer.com Web site: www.hockmeyer.com Product name: Hockmeyer Immersion with Scrapers Assembly Attributes/comments: The HCPS model is capable of milling viscosities as high as 400,000 cps. This mill is supplied with a sidewall scraper for thixotropic materials or the anchor helix scraper blade for heavier, tackier materials. The HCPS is also fitted with an auger extending out of the upper draft tube, enabling the mill to pull material from above the upper draft tube and feed it into the media field for grinding.

Myers Engineering, Inc. Bell, CA (323) 560-4723 Fax: (323) 771-7789 E-mail: cathy@myersmixer.com Web site: www.myersmixer.com Product name: Laboratory Basket Mill Model LB850 Attributes/comments: The Myers LB 850 1 liter laboratory basket mill has been designed for use for small batch sizes and to assist in formulation and scale up. Users can expect improvement in particle distribution, yield and cost reductions. The LB850 has reduced production time and eliminates certain pre-milling stages. The specially designed cooling dome can frequently eliminate the need for jacketed tanks. Batch capacity is 2 to 4 gallons. Testing is available at the Myers facility in Bell, CA.

Premier Mill, an SPX Process Equipment Operation Reading, PA (610) 728-1900 Fax: (262) 728-4904 E-mail: julie.hoover@spx.com Web site: www.spxpe.com Product name: Premier Mill SuperFLX Horizontal Media Mill Attributes/comments: The new Premier Mill SuperFLX Horizontal Media Mill offers the features and