erties are far greater. The wear is even better than ZTA, zirconia toughened alumina, but the cost is less. It is gentle on the
equipment and the best value in a medium density ceramic
grinding media.
Charles Ross and Son Company
Hauppauge, NY USA
800-243-ROSS
631-234-0691
sales@mixers.com
www.mixers.com
• Ross X-Series Ultra High Shear
The Ross X-Series produces narrow particle size distributions in
a single pass, delivering greater size reduction and throughput
compared to colloid
mills. Certain products prepared on expensive high
pressure homogenizers and difficult-to-clean media mills are
produced in the X-Series with comparable results.
Applications include
specialty coatings,
paint and inks, polymer suspensions and nanodispersions.
Show is the newest “X- 5” model consisting of precisely-ma-chined stator and matching rotor turning at over 11,000 ft/min.
Process fluid enters the center of the generator and subjected to
intense mechanical and hydraulic shear as it accelerates outward
through channels in the intermeshing rotor/stator teeth.
Myers Engineering
Bell, CA
323-560-4723
Fax: 323-771-7789
cathys@myersmixer.com
www.myersmixer.com
• M850E Basket Mill
Common to basket mills, the M850 allows for a lone tank
process eliminating pumps, hoses and extra mix tanks for prod-
uct transfer. The unique design of the Myers’ mill allows inde-
pendent speed control of both the media and batch agitators.
The agitator assists in keeping the batch homogeneous while
waiting for its next pass through the milling chamber. Exiting
the chamber, the product passes down the side of a cooling
shroud to eliminate heat build-up. The Myers dual shaft design
offers users greater flexibility in both viscosity ranges and batch
sizes. Trials are available at the Bell, CA facility.
Schold Machine Corp.
Chicago, IL USA
708-458-3788
Fax: 708-458-3866
jerryt@schold.com
www.schold.com
• UV Ink Base, 100 Liter Series II MCDIA Mill
The Schold UV Ink Base Mill has been released in its Series II
configuration. Its internal configuration is a departure from the
heavy duty, high output mills presently being sold globally supplied by Schold. With Schold’s decades of experience in high output milling, the UV low temperature milling process is done
economically and simply with the photoinitiator insitu. It is manufactured and serviced in the Schold facility in Chicago, IL.
Sunin Machine Co., Ltd.
New Taipei City, Taiwan
886-2-22407863
Fax: 886-2-22402596
sunin168@ms31.hinet.net
www.twsunin.com
• Dispersion Mixer
The Dispersion mixer is a machine suitable for work in narrow
spaces in laboratories, with a handy and practical design. The
double-purpose mixing cup can be cooled and heated through
a pipe connector according to different formulas. The innovative working structure can realize both mixing and dispersion,
and reduce material
loss and environmental pollution
during the transfer
by the peripheral
pump. It carries out
infinitive frequency
control according
to the requirement
to realize the best
effect. This unit can
be used in bulk production. The elevation of mixer can
be divided into 3
types; oil pressure-driven type, manually operated type. It is
widely applied to the fluid materials, providing mixing, dissolving and dispersion. It features easy cleaning and maintenance. It can either be connected to the mill machine in series
directly or work independently. CW
www.coatingsworld.com
Coatings World | 35
