Additives Supplier Directory
radiation-curing multi-functional additives; substrate wetting
and anti-cratering additives; hydrophobing agents; and others.
Product name: TEGO Dispers 747 W
Attributes/comments: TEGO Dispers 747 W is our new wetting and dispersing additive for water-based iron oxide concentrates in architectural applications. It promotes long-term
pigment stabilization by combining electrostatic and steric
stabilization; this leads to high color strength, even after long-term storage. TEGO Dispers 747 W stabilizes all grades of inorganic pigments.
Product name: TEGO Rad 2800
Attributes/comments: TEGO Rad 2800 is our new release
additive for radiation-curing printing inks and varnishes. It
displays the highest release effect in our TEGO Rad portfolio. TEGO Rad 2800 has pronounced silicone character,
combining strong hydrophobing properties with optimum
system compatibility.
Keim Additec Surface USA, LLC
LaGrange, IL
Phone: 708-352-2443
Fax: 708-352-2573
dave.grabacki@keim-additec.de
www.keim-additec.de
Types of additives offered: Environmentally friendly water-based wax additives, high performance, dispersing additives,
wetting additives, slip additives, defoamers, micronized waxes
and functionalized waxes for the coatings, ink and plastics
industries
Product name: SILCO SPERSE HLD-11/SC
Attributes/comments: High performance dispersing agent for
water based resonated systems, fulfilling EPA40 and CFR180
requirements for use in seed coatings and other applications.
Excellent wetting, dispersability, color development, compatibility, free of alkylphenolethoylates, free of solvents.
Product name: ULTRASEAL AGK 4
Attributes/comments: A concentrated water based polymer/wax
disperson for the use as an antigraffiti coating. Can be applied
either diluted or undiluted, by spray or brush over, concrete, tile
and painted surfaces.
Kenrich Petrochemicals, Inc.
Bayonne, NJ
Phone: 201-823-9000
Fax: 201-823-0691
sjmonte@4kenrich.com
www.4kenrich.com
Types of additives offered: Ken-React Titanate, Zirconate and
Aluminate Coupling Agents; Ken-Stat Permanent/ Transparent
Nano Antistatic Agents; Kenplast Aromatic Non-Reactive
Diluents; Kenflex Aromatic Resins.
Product name: Ken-React KCM-3E
Attributes/comments: Ken-React KCM-3E is a titanate based
additive specifically designed to increase the hyrdrophilicity and
flow of Portland Cement and enhance bond formation with water and sand/stone to increase the strength of cement compositions and to allow the addition of oil soaked sand and spent
drilling mud (US 8591646).
Lonza
Atlanta, GA
Phone: 678-624-5800
materialsprotection@lonza.com
www.lonza.com
Types of additives offered: Antimicrobials, biocides, fungicides, preservatives
Product name: Proxel LS Preservative
Attributes/comments: Proxel LS Preservative is a dual-active,
broad-spectrum biocide for the wet-state preservation of industrial, water-based products that prevents spoilage caused by bacteria,
yeasts and mold (fungi). Proxel LS Preservative is MIT-free, has a
low viscosity and is compatible with typical coatings ingredients.
Michelman
Cincinnati, OH
Phone: 513-793-7766
Fax: 513-794-7721
general@michelman.com
www.michelman.com
Types of additives offered: Water-based surface modifiers
Product name: Michem Emulsion 71150
Attributes/comments: Michem Emulsion 71150 is a stable high
solids water resistant additive for coatings. Michem Emulsion
71150 contributes to block resistance in coatings and adhesives.
It is also effective in controlling concrete curing and providing
donnability and release for industrial molding applications.
Product name: Michem Guard 1350
Attributes/comments:
Michem Guard 1350 is a water-based one micron dispersion which improves rub and
abrasion resistance in pigmented and semi-gloss coatings, and inks and overprint
varnishes at very low addition rates with little effect on
gloss. Michem Guard 1350 is
also effective in improving lubricity and block resistance.
