Draiswerke, Inc.
The NEW DRAIS DCP NANOSTAR® Media
Mill is, specifically, designed to produce
the nanomaterials previously
unattainable. The highly efficient energy
utilization during nano-grinding via the
use of ultra-small grinding media (down
to 20 micron), superior product
temperature control and the elimination
of metal contamination are some of the
key features of the new NANOSTAR®.
Various sizes are available with linear mill
scale up based on power consumption.
Draiswerke, Inc.
40 Whitney Rd.
Mahwah, NJ 07430 USA
www.draiswerke-inc.com
Lubrizol PowderAdd™ Surface Modifiers
Lubrizol Advanced Materials, Inc. offers a
complete line of surface modifiers
specifically developed to meet the
performance challenges of today’s
powder coatings. Whether you’re
seeking a low-gloss finish, textured finish
or a smooth, defect-free finish, there is a
PowderAdd™ surface modifier designed
to meet your application needs.
1-800-380-5397.
www.lubrizolcoatings.com.
LANCO™
POWDERADD™
SOLPLUS®
LANCO™FLOW
LANCO™
PRODUC T SELEC TION GUIDE
High-Performance Additives
for the Powder Coatings Industry
POWDERADD™
SOLPLUS®
LANCO™FLOW
LANCO™
POWDERADD™
SOLPLUS®
LANCO™FLOW
LANCO™
POWDERADD™
SOLPLUS®
Specialty Wax Additives for Coatings
Micro Powders’ expanded Product
Brochure outlines over 150 products and
applications for easy reference.
Contained in these 8-pages, are the
company’s complete range of specialty
additives for use in paint, coatings and
ink formulations. These technically
advanced micronized waxes, wax
dispersions and emulsions include
synthetic, polyethylene, PTFE, polypropylene and unique combinations that
are suited for special applications. The
expanded applications section details a
variety of end uses.
Micro Powders, Inc.
Tel: 914-793-4058, Fax: 914-472-7098
Email: mpi@micropowders.com
www.micropowders.com
K-Kat Catalysts
The latest offering from additives
manufacturer King Industries are two
new K-KAT® catalysts; XK-601 a tin-free
catalyst for urethanes without the
environmental drawbacks associated with
tin catalysts and K-KAT XK-604, a mercury-replacement catalyst for cast elastomers
that provides a similar cure profile to
mercury but environmentally more
acceptable with good latency before snap
curing. Technical information will be
available on King’s seven product lines for
coatings, inks, adhesives and sealants.
King Industries, Inc.
Tel: 203-866-5551 Fax: 203-866-1268
E-mail: coatings@kingindustries.com
Www.kingindustries.com
New Dispersions for Aqueous Systems
“Explore the Possibilities” with Shamrock’s
latest HIGH-EFFICIENCY water
dispersions utilizing our new process-controlled Hybrid Technology. Hydrocer
7102/Hydrocer 7112/Hydrocer 7206
were specifically formulated for gloss
retention and clarity in specialty and thin
film coatings and inks. Call our Product
Technical Center (PTC) at 800 349 1822
Ext 4 to discuss which new Hydrocer is
best for your specific application needs,
request literature or receive samples.
Shamrock Technologies, Inc.
Foot of Pacific Street, Newark, NJ 07114
Phone: 973 242 2999 Fax: 973 242 8074
marketing@shamrocktechnologies.com
www.shamrocktechnologies.com
Explore The Possibilities!
Shamrock extends its HYDROCER family
with two new High-Efficiency Dispersions
using a new process-controlled HYBRID
Technology.
“Explore the Possibilities” with
Hydrocer 7112
and
Hydrocer 7206
formulated for specialty and thin film
aqueous coatings and inks.
Key Features:
* Glossretention
* Transparency
* Efficacy
* Wet Rub Resistance
* High Slip
For conventional aqueous coatings and
inks, our HYDROCER family offers the best
performance for slip and scuff resistance.
H %Solids ActiveMaterials
Y
D
R
O
C
E
R
HYDROCER 257 45 LowMWPE 357 45 HighMWPE
6099 45 Low MWPE/PTFE
178G 50 MedMWPE/PTFE
Advanced Dispersions for Aqueous Systems 797 45 HighMWPE/PTFE
9174 60 4MicronPTFE
AQ- 50 50 1MicronPTFE
ShamrockTechnologies,Inc. ShamrockTechnologiesbvba ShamrockTechnologies(Tianjin)Co.,Ltd.
FootofPacificStreet,Newark,NJ07114 Heersteveldweg21,3700Tongeren, FactoryNo. 5,9thAve.
Ph.800-349-1822or973-242-2999 Belgium FenghuaIndustrialPark
Fax:973-242-8074 Ph.+32-12-458330 TEDA,Tianjin,China,300457
marketing@shamrocktechnologies.com Fax.+32-12-45-8340 Tel:82-22-59813081
www.shamrocktechnologies.com www.shamrockeurope.com Fax:82-22-59813099
sales@shamrocktechnologies.com.cn
Yipin Pigments
Iron oxide pigment
Chrome pigment
Pearl luster pigment
Cu Phthalocyanine
T: +1 (909) 390 3881
www.yipin.com
Industrial Mixing Equipment
Conn and Co., LLC. designs and
manufactures industrial mixing
equipment. The company has introduced
three patented blades under the
tradename Conn Blade®. The ITT style
features a combination of louvers and
teeth. The IT has louvers for gentle
mixing for shear-sensitive materials. The
ITC is an eight-vane, open style blade
that provides more shear than the IT but
is not as aggressive as the ITT. Conn
Blades reportedly attain results in a
shorter time with less heat generated.
Now available of Poly Material.
Conn & Company, 11 S. Marion St.,
Warren, PA 16365, Ph: 814-723-7980;
Fax: 814-723-8502 www.connblade.com
Little Joe Industries
Little Joe Industries offers the ADM
Automatic Draw-Down Machine for
use with grind gages. The ADM
automates the draw down process
controlling scraper angle, speed, and
force. Since these aspects are no
longer operator dependent your
grind gage draw-downs will be more
consistent while requiring less
operator training and supervision.
Uses existing grind gages and
scrapers from your current supplier.
Little Joe Industries
Phone: (908) 359-5213
Fax: (908) 359-5724
Web: www.littlejoe.com
Email: info@littlejoe.com
