New Products
19 standard exterior Envirothane colors, five safety colors and four standard primer colors for applicable
Enviroline Group coatings and linings.
EPOXY SEALER PENETRATES
DEEP TO PROTECT CONCRETE & MASONRY
The Steelcote division of Chemline has introduced
Floor-Nu Penetrating Sealer, a two-component clear
epoxy for sealing and deeply penetrating concrete or
masonry surfaces against the effects of moisture,
freeze/thaw cycles, salts, oils and specific chemicals.
Floor-Nu Penetrating Sealer locks in loose aggregate on
the surface and it forms a hard, impenetrable sub-surface.
This product is a clear, high solids—48% by volume—
coating which possesses a water-thin viscosity. This thin viscosity allows it to deeply penetrate as much as a quarter-inch into the pores of concrete or masonry surfaces.
LOCTITE INTRODUCES QUICKSTIX PRIMER
Loctite’s new QuickStix 7088 Primer is the first semisolid primer available to enhance the performance and
speed the cure of anaerobic machinery adhesives used
in threadlocking, thread sealing, gasketing and retaining applications, according to the company. This semisolid primer actually is more effective than liquid
primers in speeding adhesive cure.
Loctite QuickStix 7088 Primer is recommended for use
on plated, anodized and galvanized parts, and inactive metals such as titanium, zinc, aluminum and others. It is especially effective on cold metals and challenging assemblies
that feature large gaps or deep threads.
The new environmentally friendly primer is solvent-free and VOC compliant, and exhibits reduced odor and
decreased flammability over liquid primers. The pock-et-sized 17-gram self-feeding stick applicator is ideal
for use on overhead or hard-to-reach applications.
Patented worldwide and available only from Henkel
Corporation, this is the first anaerobic primer in a
semisolid form.
Loctite QuickStix 7088
Primer enhances perform-
ance and accelerates cure
of anaerobic machinery
adhesives used in thread-
locking, thread sealing,
gasketing and retaining
applications.
