Coatings World - February 2008

floors, cabinets, doors, paneling, molding and furniture. They are available in oil-based and water-based formulas and in gloss, semi-gloss and satin sheens.

Bulls Eye Oil-Base Polyurethane is an all-purpose, scratch resistant, amber-tone finish that offers protection and durability against damage from abrasion, alcohol, water, high-traffic and direct sunlight. The fast drying formula is ready to sand and recoat in just four to six hours and is available in 450 and 350 VOC formulas to meet most regional VOC requirements.

Zinsser has also introduced Cover-Stain Advanced Formula Water-Base Primer-Sealer Stain Killer. The product of more than four years of laboratory research and testing, Cover-Stain WB combines a resin system in an advanced water-based formula that delivers all the features and benefits of Zinsser’s High Hide Cover-Stain oil-base primer – including adhesion, fast dry, easy sanding and the ability to block water-soluble stains. Cover-Stain WB blocks stains from water, nicotine, smoke damage and tannin bleed from cedar, as well as oil-soluble stains like grease, crayon, tar or asphalt.

Cover-Stain WB dries fast to a hard flat finish that can be sanded ultra-smooth in 45 minutes. The full-bodied interior/exterior formula offers sag resistance and flexibility, as well as enamel holdout. It hides all dark colors and seals porous surfaces for better topcoat coverage and a more even color and sheen.

Cover-Stain WB sticks to all surface including glossy surfaces like tile, paneling or glossy paint without sanding or deglossing. It’s ideal for use on all interior and exterior surfaces including drywall, painted wood, cured plaster, concrete, stucco, aluminum, vinyl, steel, galvanized metal or PVC. It is currently avail-

able in the South Coast Air Quality Management District (SCAQMD) of Southern California.

NEW SHER-WOOD ONE-PASS PRIMER New from Sherwin-Williams is Sher-Wood One-Pass Primer, a low VOC waterborne primer developed specifically for the wood and composite building products market. Sher-Wood One-Pass Primer covers most substrates such as radiata pine, MDF, hardboard, dark-stained poplar, sugar pine, yellow pine, and more in a single pass, offering high build and holdout at lower solids than conventional primers.

Sher-Wood One-Pass Primer is ideal for both interior and exterior product applications such as door panels, molding, trim and door edges. It may be applied by various spray methods including roll coat, curtain coat, vacuum coat, or fancoat, and is available in a wide range of colors.

NEW FLO GLAZE

INDUSTRIAL FLOOR FINISH Flo Glaze ES is the newest product to join the line up of industrial floor finishes for Revere. Flo Glaze ES provides a hard surface that is highly resistant to abrasion and impact, and can be used on any indoor floor.

As an exempt solvent, Flo Glaze ES meets exisiting VOC regulations for all states, including OTC states (California not included).

TECHSPRAY INTRODUCES
LICRON CRYSTAL

Licron Crystal is a new permanent static dissipative coating introduced by Techspray. It is a versatile, crystal clear urethane coating that adheres to metal, plastic and most other surfaces.

Ideal for converting standard bumpers, bins, tools, and other surfaces to ESD-safe, saving expensive replacement cost.

Licron Crystal can be sprayed as an aerosol, or using standard spray guns

Licron Crystal operates from 0-100% humidity. The cured coating is durable, will not chip and maintains 107-109 ohms resistivity.

or paint systems. As long as the coat is smooth and even, the finish will be clear. A grounding wire can then be attached (i.e. by conductive adhesive) similar to an ESD floor.

RUSTOLEUM AQUA AVAILABLE
FROM DY-MARK COATINGS

The advantages of conventional aerosol application are now available in a water-based paint product, with Rustoleum Aqua.

Rustoleum Aqua, distributed in Australia exclusively by Dy-Mark Coatings, is designed to give the ideal finish to DIY projects.

Rustoleum Aqua has a unique fine-mist fan tip, which ensures an even coverage for maximum effect, and it is easy to clean up with soap and water, according to the company. In addition, the formulation is low-odor and fast drying.