New Products
Benjamin Moore launches Natura
includes a primer plus three sheens—
flat, eggshell and semi-gloss.
NISSAN’S WATER-BASED
ECO-PAINT GOES AFTERMARKET
Nissan Motor Co., has released its envi-ronment-friendly, water-based paints
for aftermarket application, under the
Pitwork brand in Japan. The paint contains half the amount of VOCs compared with conventional paints in the
marketplace emits less odors, according to the company. Initially, the paint
will be available in limited range of two
shades of silver, with more colors to be
introduced by April 2009.
The new Natura family from Benjamin Moore includes a primer plus three sheens—flat,
eggshell and semi-gloss.
Natura is the new zero-VOC premium
interior paint that recently has been
added to the stable of environmentally
responsible paints and coatings produced by Benjamin Moore. Natura is
just now making its debut on the West
Coast and in select regions such as the
Rocky Mountain States and parts of the
Deep South, and is expected to have full
national distribution by March 2009.
Unlike any other zero-VOC paints,
Natura is available in thousands of
hues and a wide range of sheens,
according to the company.
The VOC level of Natura is unaffected
by the addition of colorant because the
paint is based on Benjamin Moore’s
patented waterborne colorant system.
In fact, Natura is available in all of
Benjamin Moore’s nearly 3,500 colors,
and it can be limitlessly color-matched
to one’s personalized color choice and
still be zero-VOC. The Natura range
RANDOLPH PRODUCTS LAUNCHES
TWO MILITARY APPROVED COATINGS
Randolph Products has recently been
approved by the U.S. Navy for two new
military topcoats. The MIL-PRF-85285
Type II, Class H Polyurethane and the
MIL-PRF-22750F High Solids Epoxy
Topcoat have both been given QPL status by the U.S. Naval Air Warfare Center
(NAWC) in Patuxent River, MD. The
MIL-PRF-85285 Type II, Class H
Polyurethane Topcoat allows customers
to apply lower levels of VOC (2.8 lbs/gl.)
compared to the Type 1. This topcoat
application is designed for use on military and commercial aircraft. MIL-PRF-
22750F Epoxy Topcoat will also allow
customers the option to use a lower VOC
(2.8 lbs/gl.) product from the previous
revision. This epoxy topcoat is intended
to be used on the interior of military
ground equipment.
CORR-PAINT CP3015-BL
COATS HIGH-TEMP HEADERS
Aremco’s Corr-Paint CP3015-BL is a
new high temperature coating system
used to inhibit oxidation of carbon steel
and cast iron exhaust headers used in
automotive, truck and industrial appli-