shock, salt spray and UV resistance.
Corr-Paint CP2050 is a two-part system that is mixed in a 1-to-1 ratio by
weight. It mixes to a thick paste and is
applied using a trowel or spatula. It sets
and cures fully at room temperature in
24 hours or can be heat cured at 175ºF
for 4 hours to reduce set time. Typical
film thickness is 50 mils for a single coat.
Corr-Paint CP2050 is offered in
three standard forms: CP2050-LF,
CP2050-FF and CP2050-NF. LF
stands for long or coarse glass fibers;
FF stands for fine glass fibers; and NF
stands for no fibers.
Compared to conventional epoxy
coatings, ExpressCote HCR offers a
rapid return to service, allowing return
to full service in as little as 24 hours
and walk-on condition within five hours
when applied at 77ºF/50%RH. This
100% solids epoxy has no volatile organic compounds, and offers one-coat protection up to 50 mils and edge retention
exceeding 70%. CW
SHERWIN-WILLIAMS
INTRODUCES EXPRESSCOTE HCR
Sherwin-Williams Industrial and
Marine Coatings has introduced
ExpressCote HCR, a chemical resistant glass flake-filled epoxy novolac
lining. It is specifically designed to
protect steel and concrete from chemicals and solvents at ambient and elevated temperatures for the petrochemical, waste water, power generation and marine markets.
Sherwin-Williams ExpressCote HCR protects steel and concrete from chemicals
and solvents at ambient and elevated
temperatures.
