Additives Directory
MicroKlear 709 is a finely micronized combination of polyethylene, carnauba wax and PTFE ideally suited for use in coatings
applications where excellent gloss retention, clarity and slip are
desired such as in clear lacquers and OPVs.
Munzing
Bloomfield, NJ
973-279-1306
Fax: 973-338-0420
info@munzing.us
www.munzing.com
• EDAPLAN 490
EDAPLAN 490 is a VOC-free wetting agent and dispersant
for organic and inorganic pigments as well as carbon blacks
in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2Ksystems)
as well as for the manufacture of aqueous resin-free pigment
concentrates.
Reactive Surfaces
Austin, TX
512-472-8181
smcdaniel@reactivesurfaces.com
www.reactivesurfaces.com
Additives offered: Bio-based functional additives
• DeGreez
DeGreez functionalizes a wide variety of coating systems with
degreasting/antifinger-printing capability.
• OPDtox
OPDtox confers self-decontaminating capability to counteract
chemical weapons
• ProteCoat
ProteCoat confers non-toxic, environmentally benign, long-lasting, highly efficacious antimicrobial activity to a wide variety of
coating systems.
Shamrock Technologies, Inc.
Newark, NJ
973-242-2999/Fax: 973-242-8074
marketing@shamrocktechnologies.com
www.shamrocktechnologies.com
• FluoroSLIP 533
FluoroSLIP 533 PTFE/oxidized polyethylene powder is specifically designed for waterborne coatings to provide excellent
scratch, mar and scuff resistance. As part of the new powder-in-powder technology of shamrockt the new FluoroSLIP 533
offers immediate and easy dispersibility.
• SST-4P
SST-4P high performance PTFE powder provides the ideal combination of economics and performance. SST-4P provides excellent slip, rub and abrasion resistance in can, coil, industrial and
UV coatings.
Siltech Corp.
Toronto, ON, Canada
416-424-4567
Fax: 416-424-3158
Robert.ruckle@siltechcorp.com
www.siltechcorp.com
• Siltech C-890
Siltech C-890 is a high silicone content silicone acrylate functional pre-polymer that is designed to react under UV or other
free radical cured process into the film and provide slip, abrasion resistance and release properties. The product does not generate foam.
• Siltech C-759
Siltech C-759 is used for solventborne UV curable topcoats. It
helps to impact market resistance, anti-graffiti and anti-stain
properties, while also improving release. It will also improve
water and oil repellance.
Troy Corporation
Florham Park, NJ
973-443-0843
marketing@troycorp.com
www.troycorp.com
Additives offered: Dry-film preservatives, wet-state preservatives, performance additives including wetting, flow and leveling, mar and slip additives, defoamers, dispersants, rheology
modifiers, thixotropic agents, metal carboxylates, driers, anti-
scanning additives
• TROYKYD D209W
TROYKYD D209W is a new, solvent-free defoamer that eliminates foam in aqueous systems without compromising surface
appearance or integrity. D209W offers excellent functionality
in a broad range of aqueous systems, including high-gloss and
wood coatings, both clear and pigmented.
• Polyphase 599
For manufacturers wishing to formulate with an alternative to
the Divrow algaecide active used in industry-leading Polyphase
663, Troy introduces Polyphase 599, an advanced, low-leaching,
Divrow-free broad-spectrum fungicide and algaecide 599 offers
excellent long-term performance, environmental responsibility,
and low cost-in-use. 500 is ideal for water-based exterior paints,
coatings and stucco systems. CW
