With material handling partners REB Storage Systems and
SpaceRAK providing custom designed, cost effective rack systems,
these data and record management specialists can shred their
concerns and store their profits.
Shouldn’t you do the same?
IT’S WELL DOCUMENTED.
RECORD SETTING COMPANIES CHOOSE SPACERAK.
VALUE ADDED STORAGE SOLUTIONS
www.SpaceRAK.com • (800) 336-3926
CANTILEVER RACKS DRIVE-IN / DRIVE-THRU RACKS ENGINEERED SYS TEMS SELECTIVE RACKS PUSH BACK RACKS
83809 SpaceRak_DCVelocity 4.5x7.5.indd 1 12/6/16 12: 32 PM
Rideable material lift: Material
handling equipment and safety
products manufacturer Wildeck
Inc. has introduced a new product
category for vertical material lifts.
The new rideable material lift (RML)
product category is an advancement over a traditional vertical
reciprocating conveyor (VRC) since it allows authorized personnel
to safely travel with their material between levels.
The RiderLift RML is suited for industrial applications. Unlike
a VRC, the RiderLift has been designed to allow an authorized
person to ride with the cargo to a second level and avoid having
to climb stairs or rely on a coworker to off-load material when
the lift reaches its destination.
Wildeck’s new RML has many benefits, the company says. It
increases material handling efficiency; saves time by allowing
workers to travel between levels with their material; improves
safety, reduces fatigue, and minimizes “lost time” accidents;
increases the utilization of facility capacity gained from mezzanines, rack systems, and pick modules; and can be purchased and
installed at a fraction of the cost of an elevator.
Standard car size is six feet long by six feet wide by 80 inches
high, and lifting capacity is 2,500 pounds, including the rider.
Standard top lifting height is 14 feet, and lifting speed is 20 feet
per minute. The RiderLift material lift is available in either “C”
or “Z” loading patterns and features a keyed “enable” switch
inside the car to ensure it is used only by authorized personnel.
(Wildeck, www.wildeck.com)
Premium charger line: AeroVironment Inc. has introduced
the PosiCharge ProCore series, a family of charging units that
support and charge any material handling battery. Ranging in
power from 5kW for lower-duty vehicles to 30k W for the hard-est-working electric forklifts, the new PosiCharge ProCore Series
is designed for electric forklift fleets of all sizes.
The latest addition to AeroVironment’s family of PosiCharge
fast and opportunity charge systems, the ProCore Series includes
an array of features that make it easy to use, flexible, customizable, and cost-effective.
A lightweight, powerful, efficient charger that consumes minimal floor space, ProCore requires no specific training to mount,
install, and update. Its colorful digital display and mobile app
are designed for ease of use by enabling fleet managers or forklift operators to configure ProCore chargers on the go. Setting
up, programming, and troubleshooting ProCore chargers is
now quick and easy with an iOS or Android smartphone, the
company says.
ProCore’s modular powerstage offers flexibility to accommodate any forklift fleet, from the smallest to the largest operations.
This modular design makes ProCore easy to maintain, upgrade,
and repurpose, and its single-port architecture makes it customizable. In addition, PosiCharge standard multivoltage capabilities
allow different forklifts with different batteries to charge on the
same ProCore charger, independent of type, brand, voltage, or
size. (AeroVironment Inc., www.posichargeprocore.com)
