• Labcure UV Curing System
Miltec UV’s Labure UV Curing System offers two UV conveyers that can be configured
for a wide range of UV curing
applications. These conveyers
utilize either or both of our
two high performance UV curing systems or arc.
Phoseon Technology
Hillsboro, OR
503-439-6446
Fax: 503-439-6408
info@phoseon.com
www.phoseon.com
• FirePower
The FirePower products are high performance water-cooled LED
curing lamps offering either
12W/cm² or 16W/cm² peak irradiance; offering advanced capability for a wide variety of
coating applications. They are
available in three curing length
options; 150x20mm,
225x20mm, and 300x20mm.
• FireLine
The FireLine is a scalable water-cooled UV LED curing lamp
with uses in a wide variety of coatings and other UV curing applications. The FireLine architecture is
designed to allow the systems to be
scalable up to 2m in length.
Charles Ross and Son Company
Hauppauge, NY
800-243-7677
Fax: 631-234-0691
sales@mixers.com
www.mixers.com
• Ross Laboratory Ribbon/Paddle Blender Model 42NSD-IS
Ross introduces a new Ribbon Model, the 42NSD-1S, a multi-purpose unit equipped with interchangeable double ribbon and
paddle agitators. With a maximum working capacity of 1 cubic
foot, the 42NSD-1S is ideal for most laboratory and pilot-scale
blending requirements. This
vacuum-rated blender also
comes with a discharge extrude assembly installed
along the bottom of the
trough to enhance mixing, eliminate dead zones and enable
100% complete discharge. The unit show is supplied with
NEMA 4X controls with variable frequency drive (VFD) keypad
for convenient soft start and speed control of both the main agitator and the screw auger of the discharge extruder.
Thwing-Albert Instrument Company
West Berlin, NJ
856-767-1000
Fax: 856-767-2615
info@thwingalbert.com
www.thwingalbert.com
• FP-2255 Friction/Peel Tester
The Thwing-Albert FP-2255 Friction/Peel Tester was designed to
provide versatility offering
wide-ranging testing capabilities. The FP-2255 can measure coefficient of friction,
peel strength, seal strength
and tensile strength of flexible plastic films, paper, sheet
materials, labels, tapes and textile materials.
• MAP- 4 Tensile Testing Software
MAP- 4 is a comprehensive advanced materials testing software
system that features built-in test applications and customization options. Thwing-Albert’s MAP- 4
software partners with the Vantage
Series to test a variety of materials
including paper, plastic, textiles,
seals and more. Compatible with
Windows 7.
Red Devil Equipment Company
Plymouth, MN
763-852-1774
Fax: 763-852-1811
kmaas@reddevilequipment.com
www.reddevilequipment.com
• Model 5000
Multi-size orbital mixer built to support a wide range of applications and accepts pint (473 ml) to five-gallon ( 19 L) containers.
Rubber cushioned bearings absorb vibration and a Kevlar reinforced drive belt reduces slippage for an extended mixing life.
• Model 1000
Attributes/comments: One-gallon vortex ideal for mixing all
types of architectural paints and primers, including pint (473 ml),
quart (946 ml) and gallon (308 L) containers. Easy drop-in loading and a Kevlar reinforced drive belt prevent stretching and gear
slippage. CW
www.coatingsworld.com
Coatings World | 79
